.YCB

This elegant Grandmother Clock was designed with traditional lines, it stands 6' 3 1/2" tall and is shown with step by step instructions on Craft patterns. It's ingenious design allows you to do a professional job with the use of simple tools, the case can be made from Pine Boards and mouldings, walnut or cherry. The head is designed to accommodate a break arch dial.

Movement recommended: Hermle  451-053H, Westminster chimes or 1151-053H, Triple chimer (Westminster, St.Michael, Whittington)

Dial recommended: D26 Brass dial with rolling moon, silver chapter ring with roman numerals.

Overall clock size: 77 1/2" x 18 3/8" x 12 1/4"deep.

This delicately designed 71" hall clock is proportioned to fit the decor of the modern home. When you use the appropriate wood stain, it will look as if it were made particularly for your own furniture scheme. The case is easily made from fully detailed plans. You can carve the base ornament or use a commercial inlay instead and recess it in the base of the cabinet. Cabinet making experience is not necessary, since simple butt joints are used. If you use a little care in assembly and finishing, you will have a clock of which you can truly be proud.

Movement recommeded: Hermle 451-053H, Westminster chimes.

Dial recommended: D21 Brass dial with silver chapter ring and roman numerals.

Overall clock size: 71" x 16" x 10 1/2" deep.

THE MONTICHELLO CLOCK

Standing very proud at 7' 2" in height, this beautiful clock with traditional lines will add grace and charm to every home. This plan faithfully recreates a typical case design of the period and with the use of some basic tools you will be able to complete this clock with ease.

Movement recommended: Hermle 451-053H, Westminster chimes or 1151-053H, Triple chimes (Westminster chimes, St.Michael, Whittington)

Dial recommended: D26 Brass dial with rolling moon and silver chapter ring with Roman numerals.

Overall clock size: 86" x 18 1/2" x 13" deep.

A majestic grandfather clock with clean lines, Modeled on early 18th Century cases with arched dial and flat top. Small arched windows on the hood sides allow you to view the movement working.

Movement recommended: Hermle  451-053H, Westminster chimes or 1151-053H, Triple chimer (Westminster, St.Michael, Whittington)

Dial recommended: D26 Brass dial with rolling moon and silver chapter ring with roman numerals.

Overall clock size: 72" x 17 1/2" x 11" deep.

A FINE GRANDFATHER'S CLOCK

Here's the granddaddy of clocks. It is about 6' 1/2" tall and 18" wide. Craft pattern 364 shows complete details for building the case of boards or plywood of a hardwood with full-size patterns for cutting the irregular shaped parts. Mouldings are of stock designs, available through lumber dealers. When you have completed the case, you will marvel at its beauty and nothing short of the best in clockwork movementss will satisfy you. Building the grandfather's clock is easy, and no project will excite more envy among your friends.

Movement recommended: Hermle 451-053H Westminster chimes.

Dial recommended: D21 Brass dial with silver chapter ring and roman numerals.

Overall clock size: 78" x 18" x 11" deep.

In 1693, during the reign of William and Mary, Peter Abbott of London built an elegant longcase clock standing just 6' 6" high. Because of the unreliability of the movements in those days a lenticle glass was incorporated in the trunk door so that the owner could see the swing of the pendulum.

Many earlier longcase clocks were covered with floral marquetry work, but this clockcase has matched burr and crowncut walnut veneers which enhance the beautiful lines.

A fully detailed construction plan will enable you to build a virtual replica of Peter Abbott's masterpiece. The precision built brass movement and dial specified may be obtained from Yorkshire Clock Builders.

If so desired, the case may be built in either solid wood or 12mm plywood.

Movement recommended: Hermle 241-080 Twin bell strike.

Dial recommended: D21 Square Brass dial with silver chapter ring and Roman numerals.

Overall size: 1985 x 470 x275mm / 6' 6" x 18 1/2" x10 3/4" deep.

A country grandfather clock by Thomas Clare c.1770. This has typical North West country features with oak case work, cross banding on the hood and waist, a caddy top and ogee feet.

Movement recommended: Hermle 451-053H Westminster chimes, Hermle 1151-053H Triple chimer (Westminster, St.Michael, Whittington), Hermle 241-083 Twin bell strike.

Dial recommeded: D21 Square Brass dial with silver chapter ring and Roman numerals.

Overall clock size: 80 1/4" x 17" x 9 3/4"deep.